Configuration Utility - Hitachi WNM80 User Manual

Configuration Utility

You can use your Web browser (Microsoft™ Internet Explorer®, etc.) to check and configure the
WNM80 module's network settings.
NOTE
Please note that after making any changes to the WNM80 module's network settings, you will
need to turn the AC power of the WNM80 module off and then on again to have the settings
take effect. Even if you make changes using the Configuration Utility and then reopen this
panel, the displayed information will still not have taken effect yet.
How to Use the Configuration Utility
Open LiveViewer.
Click on the PROJECTOR button. A
list of available projectors will be
displayed. Right click on the projector
you wish to control and then select
WNM Configuration Utility.
The following panel will be displayed.
PROJECTOR button