Attaching The Wnm80 Module To The Projector - Hitachi WNM80 User Manual

Attaching the WNM80 Module to the Projector

The WNM80 module is designed exclusively for use with Hitachi's CP-X885, CP-X880 and CP-X870 model LCD projectors.
Please slowly and carefully follow the below instructions when attempting to mount the WNM80 module onto the projector.
(1) Turn off the projector by turning off its AC power switch.
(2) Remove the projector's filter cover.
Push both of the filter cover tabs down and then pull them to remove the filter cover.
Tabs
Filter cover
(3) Remove the rear cover of the WNM80 module.
Push the rear cover tabs down and then pull the rear cover to remove it.
(4) Fit the WNM80 module's clasp into the projector's recess and align the module so that it can
connect to the DVI ports on the back of the projector.
Clasp
Recess
Rear cover
Rear cover tabs
DVI port