Caller Id Log Priority Selection - Panasonic KXTA308 - ANALOG PBX Installation Manual

4.2 System Programming
Description
Selection
Default
Programming
Conditions
Feature Reference

Caller ID Log Priority Selection

Selects the first display of an incoming outside call by the Caller ID
service.
• Jack number: 01 – 08,
• Number / Name
All jacks – Name
1. Enter 904.
Display: CID Priority
2. Press NEXT.
Display: Jack NO?
3. Enter a jack number.
Pressing NEXT also can enter jack number 01.
Display example: #01:Name
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. Press END.
• This program is available when the Caller ID service provides both the
name and number. If only the number is provided, this program is not
necessary.
• To assign all jacks to the same selection, press the
this case, the display will show: #
Section 3, Features
Caller ID
( = all jacks)
:Mixed.
System Programming
904
key in step 3. In
4-131