Doorphone Access Tone Selection - Panasonic KXTA308 - ANALOG PBX Installation Manual

707
Description
Selection
Default
Programming
Condition
Feature References
4-112 System Programming
4.2

Doorphone Access Tone Selection

Enables or disables sending a doorphone access tone to a monitored
doorphone. If enabled, the access tone is heard from the doorphone
when monitoring starts.
• Doorphone number: 1 – 2,
• Enable / Disable
All doorphones — Enable
1. Enter 707.
Display: Door Ack-Tone
2. Press NEXT.
Display: Door NO?
3. Enter a doorphone number.
Pressing NEXT also can enter doorphone number 1.
Display example: DP-1:Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another doorphone, press NEXT or PREV, or
SELECT and enter the desired doorphone number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all doorphones to the same selection, press the
step 3. In this case, the display will show: DP- :Mixed.
Section 3, Features
Doorphone Call
Room Monitor
System Programming
( = all doorphones)
key in