Hold Recall Time - Panasonic KXTA308 - ANALOG PBX Installation Manual

200
Description
Selection
Default
Programming
Condition
Feature Reference
4-38 System Programming
4.2

Hold Recall Time

Assigns the length of the hold recall timer. This timer is used to
alert an extension that a call has been held for an extended period of
time.
Time: 30 sec / 1 min / 1.5 min / 2 min / 3 min / 4 min / 5 min /
6 min / Disable (= Hold Recall disabled) (seconds/minutes)
30 sec
1. Enter 200.
Display: Hold Recall Time
2. Press NEXT.
Display example: Time:30 sec
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
• When "Disable" is selected, the hold alarm is also disabled.
Section 3, Features
Hold Alarm/Hold Recall
System Programming