Panasonic KXTA308 - ANALOG PBX Installation Manual page 269

4.2 System Programming
Local Carrier-Based Voice Mail Access Dial Assignment
Description
Selection
Default
Programming
Assigns the voice mail service access number. This allows a PT
user to access the telephone company's voice mail service when a
message is left in the mailbox. The PT user can access the voice
mail service and listen to the message stored in the mailbox by
pressing the corresponding CO button (flashing red moderately)
and then the MESSAGE button after going off-hook.
• Outside (CO) line number: 1 – 3
• Voice mail service access number: 32 digits (max.)
All outside (CO) lines – Not stored
1. Enter 436.
Display: CO VM Dial
2. Press NEXT.
Display: CO NO?
3. Enter an outside (CO) line number.
Pressing NEXT also can enter outside (CO) line number 1.
Display example: #1:Not Stored
4. Enter a voice mail service access number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new
number.
5. Press STORE.
6. To program another outside (CO) line, press NEXT or
PREV, or SELECT and enter the desired outside (CO) line
number.
7. Repeat steps 4 through 6.
8. Press END.
System Programming
436
4-77