Enabling Snmp Traps - D-Link 3100 24P - DGS Switch - Stackable User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Enabling SNMP Traps

The SNMP Configuration Trap Page contains parameters for defining SNMP notification parameters. To enable SNMP
notifications: To enable SNMP Traps:
1. Click Configuration > SNMP Settings > SNMP Trap Configuration. The SNMP Configuration Trap Page
opens:
The SNMP Configuration Trap Page contains the following fields:
Field
SNMP Traps
SNMP Authentication
Traps
2. Define the SNMP Traps and SNMP Authentication Traps fields.
3. Click
55
Figure 2-18 SNMP Configuration Trap Page
Description
Specifies whether the device can send SNMP notifications. The possible field values are:
Enable — Enables SNMP notifications. This is the default value.
Disable — Disables SNMP notifications.
Specifies whether the device can send traps upon authentication failure notification.
Enable — Enables the device to send authentication failure notifications. This is the default
value.
Disable — Disables the device from sending authentication failure notifications.
. The SNMP trap status is modified, and the device is updated.