Configuring Local Enable Password - D-Link 3100 24P - DGS Switch - Stackable User Manual

DGS-3100 Series Gigabit Stackable Managed Switch User Manual

Configuring Local Enable Password

The Configure Local Enable Password Page allows network administrators to configure the local enabled password. To
define the network Local Enable password:
1. Click Security > Access Authentication Control > Configure Local Enable Password. The Configure Local
Enable Password Page opens:
The Configure Local Enable Password Page contains the following fields:
Field
Old Local Enable Password
New Local Enable Password
Confirm Local Enable Password
2. Enter the old local enable password In the Old Local Enable Password field.
3. Define the new local enable password in the New Local Enable Password field.
4. Re-enter the new password in the Confirm Local Enable Password field.
The new local enable password is configured, and the device is updated.
147
Figure 5-15. Configure Local Enable Password Page
Description
Provide the current network Enable password.
Defines the new network Enable password. The field range is 1-15 characters.
Confirms the new network Enable password.