2.
Click Modify to make changes. See
3.
Click Done to finish.
Figure 64 iSCSI Persistent Reservation Setup
.
Each cluster is required to have its own value, and each node of a single cluster must have its own
value. For example, Cluster A could have the default setting of AABBCCCCBBAA. The following
table shows possible node settings.
The HP Full Featured DSM for EVA
When the HP Full Featured DSM for EVA is installed, it sets up Persistent Reservation in the registry
by default. For more information on the HP DSM, see
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?contentType=SupportManual&
lang=en&cc=us&docIndexId=64179&taskId=101&prodTypeId=18964&prodSeriesId=421492
Microsoft Cluster Server for Windows 2008
iSCSI Failover clustering is supported on the HP StorageWorks MPX200 Multifunction Router. For
more information, see http://technet.microsoft.com/en-us/library/cc754482.aspx.
Figure 64
Node
Node 1
Node 2
Node 3
Node 4
on page 99.
Last byte value
1
2
3
4
MPX200 Multifunction Router
99