Set Alias - HP StorageWorks 6400/8400 - Enterprise Virtual Array User Manual
Hp storageworks mpx200 multifunction router user guide (5697-0202, february 2010)
Hide thumbs
Also See for StorageWorks 6400/8400 - Enterprise Virtual Array:
- User manual (150 pages) ,
- Software manual (86 pages) ,
- Reference manual (48 pages)
Table of Contents
Advertisement
Set alias
Assigns an alias name to a presented iSCSI target.
Authority
Syntax
Example:
MPX200 <2> (admin) #> set alias
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0
iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070ce9
1
iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070ce9
2
iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070ce9
3
iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070ce9
4
iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.01.50001fe150070cec
5
iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.02.50001fe150070cec
6
iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.03.50001fe150070cec
7
iqn.1986-03.com.hp:fcgw.mpx200.0834e00025.b1.04.50001fe150070cec
Please select a iSCSI node from the list above ('q' to quit): 0
A list of attributes with formatting and current values will follow.
features
iscsi [<PORT_NUM>]
isns
mgmt
ntp
properties
snmp
system
vpgroups [vpgroup index]
Admin session
set alias
Applies license keys to the router. See
command" on page 281.
Sets the iSCSI port parameters. See
command" on page 282.
Sets the Internet Simple Name Service (iSNS)
parameters. See
"set iSNS com-
mand" on page 282.
Sets the management port parameters. See
mgmt
command" on page 283.
Sets the NTP parameters. See
mand" on page 283.
Configures CLI properties for the blade. See
properties
command" on page 284.
Sets the Simple Network Management Protocol
(SNMP) parameters, such as the symbolic name
and log level. See
"set SNMP com-
mand" on page 284.
Sets system parameters, such as the symbolic
name and log level. See
"set system com-
mand" on page 285.
Sets VPGs on the blade. See
command" on page 286.
MPX200 Multifunction Router
"set features
"set iSCSI
"set
"set NTP com-
"set
"set VPGroups
279
Advertisement
Table of Contents
Troubleshooting
