Chapter 5
Install Your NOS and Configure the NetServer
1. Insert the HP NetServer Navigator CD-ROM and restart the NetServer.
2. Open the Readme File from the HP NetServer Navigator menu to find
up-to-date configuration information. For instructions on opening this file,
see your NetServer's Installation Guide.
3. From the HP NetServer Navigator Main Menu, select Configuration
Assistant.
4. Use Express configuration or Custom configuration to perform the
following steps:
Select your NOS.
Reinstall your NOS.
View Configuration Advisories.
Configure Remote Management.
Execute Card Utilities to complete the configuration of installed
boards.
For complete instructions on performing these steps, please refer to your
NetServer's Installation Guide.
Updating Firmware
41