Install Additional Mass Storage Devices; Configure The Hp Netserver And Install Additional Isa Boards - HP D5970A - NetServer - LCII User Manual

Chapter 1
Boards can be identified by the shape of their connectors:

Install Additional Mass Storage Devices

NOTE
In certain configurations, if you are installing an IDE drive or
SCSI devices you will need additional cables or adapters. For
configuration information, see the Technical Information
Label on the side of the chassis, or Information Assistant on
the HP Navigator CD-ROM.
For part numbers for HP cables, adapters, and trays, see the Technical
Information Labels on the top and side of chassis.
Configure the HP NetServer and Install Additional
ISA Boards
NOTE
Do not install ISA boards until instructed by the Configuration
Assistant program.
1. Reassemble the HP NetServer and connect the power cord.
2. Turn on the HP NetServer and monitor.
ISA
PCI
Figure 1-4. Connector identification
Installation Overview
EISA
5