HP D7171A - NetServer - LPr Upgrade Manual page 24

Chapter 4
1A
2A
3A
4A
1B
2B
3B
4B
Figure 4-1. DIMM Sockets on LH 6000/6000r System Board
2. Locate the socket in which you will install the DIMM, and spread the two
retaining clips outward (see Figure 4-2).
3. Hold the DIMM at a 90-degree angle to the system board. Be sure to
handle the module by its ends; do not touch the pins.
4. Align the notches on the DIMM with the keys in the socket.
Figure 4-2. Installing the DIMM in a Socket
20
Installing LH 6000/6000r Components
DIMM
Notches
Keys
Retaining Clips