HP D6030A - NetServer - E50 Installation Manual page 21

Chapter 3
71. Click Yes. To accept that there is no modem.
72. Click Next at the installed modems screen.
73. Click Yes at the fax server dialog box to accept that the service will not be
installer.
74. Hardware Confirmation screens shows the following:
One IDE CD-ROM.
One HP NetServer 10/100 PCI NIC.
One video property: Current video resolution
(Must be changed now)
75. Click Change.
76. Click Window Minimize button. This is the symbol on top right of the
windows frame to move the wizard to the task bar the wizard.
77. Notice that the "Display Properties" application is running on background.
78. If present, move the control panel out of the way.
79. Click OK at "Invalid display setting" dialog box.
80. Set the desktop area to 800x600.
81. Set Refresh frequency to 72Hz, or any desired value.
82. Click Test.
83. Click OK at the "Testing mode" dialog box.
84. Click Yes if it passed the test. Otherwise, troubleshoot any issue.
85. Click OK to accept video settings.
86. The system now switches to new video settings.
87. Double-click Hardware Confirmation Wizard ICON on the taskbar.
88. Click Next.
89. The system will display "Start installation of Service Pack 4".
90. Remove any diskette. System will restart.
91. If present, click OK at the service control dialog box.
92. Click Next at "SBS 4.5 Will now continue. Set up will
install your applications next"
93. Enter company information. Address, City, State, Zip.
94. Click Next.
Microsoft NT Small Business Server 4.5 Installation Guide
17