Microsoft Windows 2000 Server And Advanced Server Installation Guide For The Hp Netserver E 200; Section 1. Hardware Requirements For Installation; Section 2. Create The E 200 Drivers Diskette; Section 3. Perform Manual Windows 20000 Installation - HP D6030A - NetServer - E50 Installation Manual

2 Microsoft Windows 2000 Server and
Advanced Server Installation Guide
for the HP NetServer E 200
This section was created January 27, 2000.

Section 1. Hardware Requirements for Installation

Prepare your NetServer following the instructions in the E 200 Installation Guide.
It is recommended that you do not install any third party adapter until you verify
that the Hewlett-Packard equipment is functioning properly and you complete the
Microsoft Windows installation.

Section 2. Create the E 200 Drivers Diskette

Your system includes an HP Startup CD. Boot your system from the CD and
follow the on-screen instructions to create two Drivers Diskettes and two HP
Diagtools Diskettes.
Drivers Diskette #1 – SCSI and LAN drivers
A:\SCSI – drivers for HP SCSI card
A:\NICDRV – drivers for HP LAN card
Drivers Diskette #2 – High resolution video drivers
A:\VIDEO – drivers for HP video card
Section 3. Perform Manual Windows 20000
Installation
The installation of Windows 2000 contains five phases.
Phase 0 – Run Diagnostics (Optional)
Phase 1 – Driver Installation
Phase 2 – Hard Drive Preparation
Phase 3 – System Configuration Details
9