How To Use The Mib Complier - D-Link D-View 5.1 User Manual

D-View 5.1 User's Guide
♦ Module to which the object belongs
♦ Syntax
♦ Access limit
♦ Status
♦ Description, and so on.
The compiler can communicate with a remote device (bridge, switch, or router) to get
the current value or to set a new value for the MIB object of interest. This is achieved
by sending SNMP requests and receiving SNMP responses to get/set the value of the
object of the MIB, which resides in an SNMP enabled device.
Note:
Not every MIB needs to be implemented in an SNMP-enabled device.
The current values of the MIB objects of a specific device can be obtained in two ways:
"Info" or "Table View." "Info" shows more detailed information for objects, both
definitions and values. "Table view" shows only the values of objects.

How to Use the MIB Complier

Step 1:
Invoke the MIB Compiler.
76