Table of Contents
Advertisement
D-View 5.1 User's Guide
"/N," "/I,""/R,""/W" respectively stand for Module Name, IP Address, Write
Community String, and Read Community String.
Re-install Windows Registry and set up as follows:
Execute Regedit.
Under HKEY_LOCAL_MACHINE SOFTWARE D-Link Modules there are
four data folders. Enter data into these four data folders as below:
ExePath:
1.
as Key. Select and then right-click with mouse on newly added words
value. At the value name input Device OID. Input execution file name.
Add /N before the execution file name.
Figure 162
Record SNMP Device Module execution file with Device OID
239
Advertisement
Table of Contents
