Table of Contents
Advertisement
D-View 5.1 User's Guide
IpRouteAge is a read-write MIB object of the ip group that displays the time since this
route was last updated or otherwise determined to be correct.
IpRouteMask is a read-write MIB object of the ip group that displays the subnet mask
for the destination IP address of this route. This mask is used to identify the subnet
field of an IP address. Depending on the internet class, subnet mask can be 255.0.0.0
for Class A, 255.255.0.0 for Class B, or 255.255.255.0 for Class C.
IpRouteMetric5 is a read-write MIB object of the ip group that displays the alternate
routing metric for this route. Routing metric is used to configure preferred paths.
IpRouteInfo is a read-only MIB object of the ip group that displays a reference to the
MIB definition specific to the routing protocol used for this route.
The Refresh button refreshes the table. You need to refresh the table once in a while to
ensure all updates performed on the device (specially those that affect the above MIB
objects) are reflected on this table.
For this option, the system does not support modifications to the settings of those MIB
objects (above) with read-write attributes. To modify these objects, you can use the
device-specific management module, or the device onboard console program (if it comes
with one). Please refer to the appropriate manuals for more information.
IP Address Table
This command accesses IP addressing information from the device IP address table.
Choosing this command displays the MIB-II IP Address Table:
The following describes the various components on the above table:
The address table displays IP addressing information about the device. This table is
divided into six columns as listed below. Except for the Index column, all columns in
this table can be resized by dragging their respective right borders with the mouse left
button. The following describes each column:
The Index column displays the corresponding index number of each entry.
IpAdEntAddr is a read-only MIB object of the ip group that displays the IP address to
which the entry's addressing information pertains.
IpAdEntIfIndex is a read-only MIB object of the ip group that displays the index value
which uniquely identifies the interface on the device to which this entry applies.
IpAdEntNetMask is a read-only MIB object of the ip group that displays the subnet
mask associated with the IP address of this entry. This mask is used to identify the
subnet field of an IP address. Depending on the internet class, subnet mask can be
255.0.0.0 for Class A, 255.255.0.0 for Class B, or 255.255.255.0 for Class C.
126
Advertisement
Table of Contents
