Select Wizard - HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual

Chapter 5

Select Wizard

NOTE If any physical drives have been moved, added, removed,
changed, or changed in state since HP NetRAID Assistant was
started, rescan the drives by choosing the Adapter menu and
then selecting the Rescan option.
To launch the HP NetRAID Assistant Wizard:
1. Select the Configuration menu.
2. Choose the Wizard. The Wizard starting window is displayed, as shown
in Figure 5-5, with a choice of Custom and Automatic configuration
modes.
Figure 5-5. HP NetRAID Assistant Wizard Starting Window
52
Installation and Configuration