HP P3410A - NetRAID 1M RAID Controller Installation And Configuration Manual page 128

Chapter 9
Adapter Selector
Figure 9-1. HP NetRAID Assistant Window
If HP NetRAID Assistant is started on a client or server that can access
integrated HP NetRAID controllers or HP NetRAID-1M or 2M adapters over the
network, you must select the server you want to access. The HP NetRAID
Assistant Main window has a Server pull-down list next to the Adapter
pull-down list.
When you select a server from the server selector box on HP NetRAID Assistant,
a window appears with the choice of access modes: Full Access and View Only.
Select one.
Full Access mode requires that authorized users enter a password. The
password is case-sensitive. The password must be given before full access
can be established to a server, and each server can require a unique
password. Full Access mode activates features that let you change the
HP NetRAID configuration and the states of physical and logical drives.
For example, in Full Access mode, you can initiate recovery from a disk
failure, or make a new hot spare.
120
Managing Servers Over the Network
Toggle to Select View