Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual page 76
Type b ethernet interface card
Hide thumbs
Also See for C823642 - Enet Print Server Type B Multi Protocol 10/100BTX:
- Product support bulletin (10 pages)
Table of Contents
Advertisement
Configuring the Ethernet card in Remote Printer mode
1.
From the System Console of the file server where you set the print
queue, load the print server module with the following command
(type the print server name you used in step 4 on page 4-26):
>LOAD PSERVER print server name
2.
Run EPSON Net!2 from the Start menu.
3.
The EPSON Net!2 dialog box shows a list of printers on the
network. Select the printer you want to configure from the list
and click Configuration.
Note:
If you have connected more than one printer with the same type of
Ethernet card to the network, you can identify the cards by their
MAC addresses. To view a card's MAC address, press the status
sheet button on the card for three seconds. See Chapter 1 for
details.
If the IP address is set to the default, the printer model might not
appear.
4-32 Using the Ethernet Card with NetWare
Advertisement
Table of Contents
