Using Netware 4.1X; Instructions For Using Netware - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Primary print server:
Select the print server name you have created.
Printer port number:
Type the same port number you assigned to the print server
(type 0).
Click OK to save your changes. If the message "Configuration is
6.
successfully done" appears on your screen, the update is
complete.
c
Caution:
Once you make changes to the Ethernet card, you must wait
until it registers the settings before turning off the printer.
7. Switch to the Print Server screen of the File Server Console, and
check if the job status is Standby.

Using NetWare 4.1x

Follow these instructions to set up your Ethernet card for use with
NetWare 4.1x.

Instructions for using NetWare

Printing a text file
When you print a text file using the NetWare NPRINT command
or DOS redirection, misconversion or a gap in characters might
occur depending on the client environment.
Bindery and NDS
When printing on the network printer from a Bindery
client, make the object related to the print server right
under the Bindery context in the directory tree.
The bindery context path can be confirmed from the server
console with the SET BINDERY CONTEXT command.
4-16 Using the Ethernet Card with NetWare