Epson Status Monitor 2 (Windows Only); Using Epson Status Monitor 2 In Netware - Epson C823642 - Enet Print Server Type B Multi Protocol 10/100BTX Administrator's Manual

Chapter 11

EPSON Status Monitor 2 (Windows Only)

EPSON Status Monitor 2 is a utility program that:
Monitors and shows information about your printer,
including the amount of remaining ink or toner.
Provides error messages if a print error occurs.
Allows you to print using the TCP/IP protocol with
Windows 95 and Windows 98.
For more information on using the Status Monitor, open the online
help included with the utiity.
Note:
Before using the Status Monitor, be sure to read the Readme file located on
the Ethernet card CD-ROM. This file contains the latest information.

Using EPSON Status Monitor 2 in NetWare

You can use the network printer though the NetWare server. Connect
the printer to a Bindery queue or NDS queue in Windows 95,
Windows 98, Windows NT 3.51, or Windows NT 4.0. Use
IntranetWare Client32 Ver 1.12 or later if you are using Windows 95
or Windows 98. Use IntranetWare Client if you are using Windows
NT. See the EPSON Status Monitor 2 Readme file for more
information about NDS support. You must set the port number to 0
when using Remote Printer mode.
EPSON Status Monitor 2 (Windows Only) 11-1