IP Camera 200 Series
3.6
SD card
Figure 3.6 SD card
1.
2.
3.
The camera supports most SD/SDHC cards. For a list of
recommended cards (not supplied by Bosch), please visit
www.boschsecurity.com
3.7
Mounting the camera
The camera can be mounted either from the top or from the
bottom (1/4"-20 UNC thread). The mounting socket is isolated
from ground to prevent ground loops.
CAUTION!
Do not point the camera/lens into direct sunlight as this may
damage the sensors.
Bosch Security Systems
Unscrew the cover on the right side of the camera.
Slide the SD card into the slot.
Close and secure the cover.
Installation and Operation Manual
Installation | en
AR18-09-B003 | v1.1 | 2010.05
19