Audio Connectors; Resetting The Camera - Bosch NBC-225-P Installation And Operation Manual

18 en | Installation
3.4

Audio connectors

Line in: 9 kOhm typ., 200 mVrms
Line out: 16 Ohm min. 200 mVrms
Figure 3.4 Audio connectors
Connect audio devices to the Line In and Line Out connectors.
3.5

Resetting the camera

If the camera cannot be connected because the IP address has
changed, press and hold the reset button (7 seconds
approximately) until the LED flashes (red) to recall the factory
default values. The factory default IP address is 192.168.0.1
Figure 3.5 Reset button
AR18-09-B003 | v1.1 | 2010.05
Line - L
GND
Line - R
Installation and Operation Manual
IP Camera 200 Series
Bosch Security Systems