Show Traffic Control; To Display Traffic Control Setting For Ports 1-5 - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual

show traffic control

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To display traffic control setting for ports 1-5:

DES-3026:4#show traffic control group_list 1-5
Command: show traffic control group_list 1-5
Group
[port]
----------
1
2
3
4
5
Total Entries: 5
DES-3026:4#
Used to display current traffic control settings.
show traffic control {ports <portlist>}
This command displays the current storm traffic control configuration
on the Switch.
ports <portlist> - Enter a port or range of ports to be viewed.
None.
Threshold Broadcast
(Kbit/sec) Storm
------------ ---------------
64 Disabled
64 Disabled
64 Disabled
64 Disabled
64 Disabled
Multicast Destination
Storm Lookup Fail
--------------- ----------------
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
74