DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
config snmp system_location
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch location for "H Q 5 F ":
DES-3026:4#config snmp system_location HQ 5F
Command: config snmp system_location HQ 5F
Success.
DES-3026:4#
config snmp system_name
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To configure the Switch name for "
Used to enter a description of the location of the Switch.
config snmp system_location {<sw_location>}
The config snmp system_location command is used to enter a
description of the location of the Switch. A maximum of 255
characters can be used.
<sw_location> - A maximum of 255 characters is allowed. A NULL
string is accepted if there is no location desired.
Only administrator-level users can issue this command.
Used to configure the name for the Switch.
config snmp system_name {<sw_name>}
The config snmp system_name command configures the name
of the Switch.
<sw_name> - A maximum of 255 characters is allowed. A NULL
string is accepted if no name is desired.
Only administrator-level users can issue this command.
DES-3026 Switch"
DES-3026:4#config snmp system_name DES-3026 Switch
Command: config snmp system_name DES-3026 Switch
Success.
DES-3026:4#
:
46