Show Stp Ports - D-Link DES-3010G Command Line Interface Reference Manual

DES-3010F / DES-3010G / DES-3018 / DES-3026 Layer 2 Switch CLI Reference Manual
Max Age
Hello Time
Forward Delay
Hold Time
CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh
Status 2 : STP disabled
DES-3026:4#show stp
Command: show stp
Bridge Parameters Settings
STP Status
Max Age
Hello Time
Forward Delay
Priority
STP Version
TX Hold Count
Forwarding BPDU : Enabled
DES-3026:4#

show stp ports

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display STP state of all ports, with STP enabled:
: 20
: 2
: 15
: 3
: Disabled
: 20
: 2
: 15
: 32768
: RSTP
: 3
Used to display the Switch's current per-port group STP configuration.
show stp ports <portlist>
This command displays the Switch's current per-port group STP
configuration.
<portlist> − Specifies a port or range of ports to be configured.
None.
65