Show Snmp View - D-Link DES-3010F Command Line Interface Reference Manual

delete snmp view
Restrictions
Example usage:
To delete a previously configured SNMP view from the Switch:

show snmp view

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display SNMP view configuration:
DES-3026:4#show snmp view
Command: show snmp view
Vacm View Table Settings
View Name
--------------------
ReadView
WriteView
NotifyView
restricted
restricted
restricted
restricted
restricted
CommunityView
CommunityView
CommunityView
Total Entries: 11
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
all − Specifies that all of the SNMP views on the Switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be deleted from the Switch.
Only administrator-level users can issue this command.
DES-3026:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DES-3026:4#
Used to display an SNMP view previously created on the Switch.
show snmp view {<view_name 32>}
The show snmp view command displays an SNMP view previously
created on the Switch.
<view_name 32> − An alphanumeric string of up to 32 characters
that identifies the SNMP view that will be displayed.
None.
Subtree
-------------------------
1
1
1.3.6
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
View Type
----------
Included
Included
Included
Included
Included
Included
Included
Included
Included
Excluded
Included
30