Show Iproute - D-Link DES-3010F Command Line Interface Reference Manual

DES-3026:4#delete iproute default 10.53.13.254
Command: delete iproute default 10.53.13.254
Success.
DES-3026:4#

show iproute

Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display the contents of the IP routing table:
DES-3026:4#show iproute
Command: show iproute
Routing Table
IP Address/Netmask
---------------
0.0.0.0
10.0.0.0/8
Total Entries: 2
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
Used to display the Switch's current IP routing table.
show iproute {<network address>} {static}
This command will display the Switch's current IP routing table.
network address – IP address and netmask of the IP interface that is
the destination of the route. The address and mask information may
be specified by using the traditional format (for example,
10.1.2.3/255.0.0.0 or in CIDR format, 10.1.2.3/8).
static - Use this parameter to display static iproute entries.
None.
Gateway
---------------
10.1.1.254
10.48.74.122
151
Interface Hops
--------------- ----
System 1
System 1
Protocol
-----------
Default
Local