Enable Port_Security Trap_Log; Disable Port_Security Trap_Log; To Enable The Port Security Log Trap Function - D-Link DES-3010F Command Line Interface Reference Manual

enable port_security trap_log

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:

To enable the port security log trap function:

DES-3026:4# enable port_security trap_log
Command: enable port_security trap_log
Success.
DES-3026:4#

disable port_security trap_log

Purpose
Syntax
Description
Parameters
Restrictions
DES-3026:4#disable port_security trap_log
Command: disable port_security trap_log
Success.
DES-3026:4#
DES-30XX Layer 2 Switch CLI Reference Manual
Used to enable the trap log function for port security.
enable port_security trap_log
This command is used to send trap messages to the Switch's log
when a new MAC address violates the pre-defined port security
configuration. This information will include the MAC address of the
undefined device along with the port being infringed upon.
None.
Only administrator-level users can issue this command.
Used to disable the trap log function for port security.
disable port_security trap_log
This command is used to disable sending trap messages to the
Switch's log when a new MAC address violates the pre-defined port
security configuration. This information will include the MAC address
of the undefined device along with the port being infringed upon.
None.
Only administrator-level users can issue this command.
126