Advertisement
(42) A-bus Selection Buttons (A)
SOURCE 1:
Used to select Source 1 Audio/Video Signals (66)
(67) (68) supplied to the rear panel.
SOURCE 2:
Used to select Source 2 Audio/Video Signals (70)
(71) (72) supplied to the rear panel.
EXT CAMERA:
Used to select External Camera Signal (74) (75)
supplied to the rear panel.
BACK COL.:
Used to select the Back Colour (36).
(43) B-bus Selection Buttons (B)
Same selection can be available as mentioned in the
A-bus Selection Buttons (42).
(44) Wipe Button (WIPE/EDGE)
For selecting the Wipe Effect.
(45) Mix Button (MIX)
For the Mix Effect.
(46) Picture-In-Picture Button (P-IN-P/EDGE)
For the Picture-In-Picture Effect.
(47) Audio Follow Button (AUDIO FOLLOW)
When this button is pressed, the audio on the A-bus
and B-bus can be changed according to the relative
percentage position of the Mix/Wipe Control (56).
(48) Time Control (TIME)
For adjusting the transition time of Auto Fade Function
(55) and Auto Take Function (57).
(49) Video Button (VIDEO)
Used to fade-in/out the video, but not audio.
(50) Superimpose Button (SUPER)
Used to fade-in/out the superimposed picture.
(51) Audio Button (AUDIO)
Used to fade-in/out the audio.
(52) Back Colour Button (BACK COL)
For fading out to the Back Colour scene.
(53) White Button (WHITE)
For fading out to the white scene.
(54) Black Button (BLACK)
For fading out to the black scene.
(55) Auto Fade Button (AUTO FADE)
Automatic fade can be executed according tothe time
set by TIME Control (48).
(56) Mix/Wipe Control (MIX WIPE EFFECT)
Mix and wipe can be performed by operating this con-
trol.
(57) Auto Take Button (AUTO TAKE)
Automatic wipe or mix can be executed accoring to
the time set by TIME Control (48).
Advertisement
