Advertisement
D. Picture-in-Picture
MIX WIPE EFFECTIFADE CONTROL
Drop Shadow
Back Colour
Drop Shadow
Drop Shadow
Edge
Back Colour
AT7-
A single squeezed picture or double squeezed pictures
can be inserted in the screen.
Four kinds of Picture-In-
Pictures are available as follows.
Reset the operation panel 4g initial mode.
1 Slide the Mix/Wipe Control fully to the
B-bus position.
2 Press one of the A-bus Selection
Buttons.
3 Press one of the B-bus Selection
Buttons except BACK COL. buttons.
4 Press the P-IN-P/EDGE button.
Picture-In-Picture mode changes by pressing this but-
ton repeatedly as shown.
Notes:
1. The colour of the Edge can be changed by oper-
ating Back Colour Select Button (36). The com-
plementary colour will be added.
2. The BACK COL. button for the B-bus cannot be
selected
in Single Picture-In-Picture
mode.
The
BACK COL. button for both the A-bus and B-bus
cannot be selected
in Double Picture-In-Picture
mode.
3. When you slide the Mix/Wipe Control to the A-bus
position,
the
P-IN-P
picture
dissolves
into
the
back ground scene.
Advertisement
