Panasonic GP-X Series User Manual page 147

Set model name
Item
Supply voltage
Current consumption
Analog voltage output
Response time
Resolution (Note 2)
Linearity (Note 2)
Temperature
characteristic
Comparison output
Alarm output
Strobe output
Short-circuit
protection
External input
Sampling frequency
Zero-set setting method
MODE
HI
GO
LO
TIMINIG
Upper line digital indicator part
Lower line digital indicator part
Ambient temperature
Ambient humidity
Noise immunity
Vibration resistance
Shock resistance
Grounding method
Material
Weight
Accessory
Ramco Innovations www.ramcoi.com
NPN output GP-XC3SE
PNP output GP-XC3SE-P
(Note 4)
0.04% F.S. (64 times average processing)
(Note 3)
<NPN output type>
NPN open-collector transistor
Maximum sink current: 100mA
Applied voltage: 30V DC or less
Residual voltage: 1.6V or less
<NPN output type>
Photocoupler input
Input current: 9mA or less
Operating voltage: ON voltage 17V or more
Input impedance: 5k
Orange LED (lights up when the upper value is exceeded)
Green LED (lights up when within the upper and lower limit value)
Orange LED (lights up when less than the lower limit value)
Green LED (lights up as per the external or internal trigger timing)
5 digit orange LED (display of numerical values out of the upper and lower limit value)
5 digit green LED (display of numerical values within the upper and lower limit value)
Power supply line: 1,000Vp, 10ms cycle, 0.5 μs pulse width
Radiation: 300Vp, 10ms cycle, 0.5 μs pulse width (with noise simulator)
10 to 55Hz frequency, 0.75mm amplitude in X, Y and Z directions for two hours each
100m/s 2 acceleration (10G approx.) in X, Y and Z directions five times each
an ambient temperature of +20°C.
combination of sensor head and controller.
invalid.
GP-XC5SE GP-XC8S
GP-XC5SE-P GP-XC8S-P
24V DC 10% Ripple P-P 10% or less
150mA or less
• Output voltage: -5 to +5V (Note 2)
• Output impedance: 100 Ω approx.
0.075ms (Fastest)
0.02% F.S. (64 times average processing)
Within
0.07% / F.S. / °C or less
(between output and 0V)
(at 100mA sink current)
0.4V (at 16mA sink current)
Incorporated
(between 24V and input)
OFF voltage 4V or less
(between 24V and input)
approx.
40kHz (25 μs)
Push button setting/External input setting
Orange LED (lights up in mode status)
0 to +50°C (No dew condensation), Storage: 0 to +50°C
35 to 85%RH, Storage: 35 to 85%RH
Floating earth
Enclosure: Polycarbonate
120g approx.
ATA4811 (Controller mounting bracket): 1 set
Phone 800-280-6933 nsales@ramcoi.com
GP-XC10M GP-XC12ML
GP-XC10M-P GP-XC12ML-P
0.3% F.S.
<PNP output type>
PNP open-collector transistor
Maximum source current: 100mA
Applied voltage: 30V DC or less
(between output and
Residual voltage: 1.6V or less
(at 100mA source current)
0.4V (at 16mA source current)
<PNP output type>
Photocoupler input
Input current: 9mA or less
Operating voltage: ON voltage 17V or more
(between 0V and input)
OFF voltage 4V or less
(between 0V and input)
Input impedance: 5k approx.
GP-XC22KL
GP-XC22KL-P
V)
141