Canon Arizona 6100 XTHF Mark II Series User Manual page 71

Maintenance Tasks
Maintenance tasks based on period
Maintenance Guidelines on page 152
See
scheduled daily, weekly or monthly.
Maintenance Tools
Auto-Maintenance
AMS is the automatic printhead maintenance system. The Auto-Maintenance menu allows the
operator to select the printhead that require nozzle recovery and to determine whether a
Standard or Long purge is need for recovery (see
Clean AMS
The AMS must be cleaned daily to ensure good nozzle recovery. This menu allows the operator
to begin the cleaning cycle when it is ready for that operation (see
Maintenance System (AMS) on page
UV Bulb Replacement
This menu provides a reminder that the bulbs must cool down to handle them, and then allows
the operator to move the carriage to a location where the UV lamp housing can be reached (see
How to Change a UV Lamp Bulb on page
Move Carriage
Moves the carriage to a position where the underside can be cleaned.
for the list of maintenance task and whether it is
Recovering Nozzles by AMS on page
162).
172).
Chapter 3 - How to Navigate the User Interface
Maintenance Tasks
156).
Cleaning the Automatic
71