Enabling Composite Batch Job Nesting - Canon Arizona 6100 XTHF Mark II Series User Manual

Enabling composite batch job nesting

Introduction
To increase productivity you can automatically print composite batch jobs in a single print.
This is possible when the following conditions are met:
• All member jobs use the same print mode.
• Member jobs do not overlap.
• Member jobs do not require varnish or overprints.
Procedure
1. On the operator panel click on [Settings] →[Printer].
2. In the 'Printing' section tick the checkbox [Composite batch job nesting].
Chapter 6 - How to Print in Batch and Dual Origin Modes
Enabling composite batch job nesting
109