Cleaning The Ink Spit Tray - Canon Arizona 6100 XTHF Mark II Series User Manual

Cleaning the Ink Spit Tray

Introduction
The ink spit tray must be cleaned daily with a lint-free cloth and Isopropyl alcohol (IPA) or Surface
Cleaner.
Equipment
• Safety glasses with side shields
• Gloves (for example: Ansell Microflex 93-260)
• Cloth-Poly Wipe 10cm x 10cm (lint-free)
• Surface Cleaner
• Isopropyl alcohol - IPA (>= 98%)
Procedure
1. Move the carriage to the maintenance position (See the Tools and Utilities tab in the user
interface).
2. If there is excessive ink, first soak up some by blotting with an absorbent cloth (do not scrub).
Then soak a lint-free cloth in Isopropyl alcohol (IPA) or Surface Cleaner and scrub the surface
where there is ink.
IMPORTANT
It is important to use lint-free cloths as fibers from other types of cleaning materials
can get caught in the slots of the spit tray.
3. If necessary, repeat with a clean cloth until all ink is removed.
Cleaning the Ink Spit Tray
Chapter 9 - Printer Maintenance 161