Table of Contents
Advertisement
46 Mechanical installation
Placing the converter
The cabinet can be placed into its final position with an iron bar and a wooden piece at the
bottom edge of the cabinet. Place the wooden piece carefully to avoid damage to the cabinet
frame.
The cabinet can be installed with its back against a wall. Fasten the cabinet to the floor and
wall/roof.
Install the converter in an upright vertical position.
Notes:
•
Leave a 400 mm (16 in) clearance above the converter cabinet.
•
Leave space at the side for the coolant pipes.
•
You can adjust the height, for example, if the floor is uneven by using metal shims
between the cabinet frame and floor.
> 400 mm (16 in)
150 mm (6 in)
Advertisement
Table of Contents
