Pioneer SC-99 Service Manual page 49

5
(6) Release the 2P cable (ADX7760) from the
two PCB binders.
Note on assembling
∗5: Twist the two PCB binders around the 2P
cable (ADX7760) and tilt in the direction of
the blue arrow, so that it doesn't touch the
capacitors and diode.
(7) Release the 15P FCC (ADD7791) from the
PCB binder.
(8) Remove the 15P FFC (ADD7791) from the
MIC HP GUARD ASSY and then move
under the PCB binder.
Notes on assembling
∗6: PCB binder tilt in the direction of the blue
arrow.
∗7: Bend the 39P FCC. (ADD7796)
∗8: Don't touch the cables to a top of screws.
(9) Release the cables from the three PCB binders.
Notes on assembling
∗9: PCB binder tilt in the direction of the blue arrow.
∗10: Doesn't touch the 7P cable (ADX7753) to the
jumper wires of the DISPLAY BRIDGE ASSY.
DISPLAY BRIDGE ASSY
7P cable (ADX7753)
∗9
Insert to dent
Front
(10) Cut the three Binders.
(11) Remove the HDMI Cable (ADX7732) by
disconnect the connector.
Notes on assembling
∗11: Twist the two PCB binders around the
Housing(D) (ADX7821) and tilt in the
direction of the blue arrow, so that it doesn't
touch the DIGITAL MAIN ASSY, diode,
capacitor, screw and the Bonnet.
∗12: HDMI Cabel (ADX7732) and Housing(D)
(ADX7821) bind together inside.
5
6
USB RECT_M ASSY
2P cable (ADX7760)
Front
DISPLAY BRIDGE ASSY
Front
39P FFC
∗10
10
Front
6
7
capacitor
6
∗5
6
∗5
∗8
∗6
∗8
7
15P FFC
8
∗7
10
11
10
JA9620
HDMI Cable
DIGITAL MAIN ASSY
SC-99
7
8
diode
FRONT HDMI USB ASSY
capacitor
7P cable (ADX7753)
MIC HP GUARD ASSY
7P cable (ADX7753)
9
∗12
Housing(D)
∗11
capacitor
∗11
∗11
9
9
8
A
B
C
D
∗11
E
∗11
F
49