Injecting Bursts Of Steam; Changing The Function - Miele DGC 7840 HC Pro Operating And Installation Instructions

Operation
Switching on the Crisp function
The
Crisp function
separately for each cooking programme.
Example: You have selected a function
and the required settings such as the
temperature.
You want to switch on the
for this cooking programme.
 Drag down the pull-down menu.
Depending on the colour scheme,
is highlighted in either black or
function
white.
 Select
Crisp function
is highlighted in orange.
Crisp function
 Close the pull-down menu.
The
Crisp function
The
Crisp function
again at any time via the pull-down
menu.
68
has to be switched on
Crisp function
.
is switched on.
can be switched off

Injecting bursts of steam

You can inject bursts of steam during
the cooking process in all oven
functions (except
number of bursts of steam is unlimited.
You can release a burst of steam as
soon as
is shown in green.
Please wait until the heating-up phase
is completed to allow the steam to be
Crisp
distributed evenly in the warm air in
the oven.
 Select
The burst of steam will be released. This
will take approximately 1 minute.
 Proceed as described to release
further bursts of steam once
shown in green again.

Changing the function

You can change to another function
during a cooking programme.
 Touch the symbol for the selected
function.
 If you have set a cooking duration,
confirm the
with
Yes
 Select the new function.
The new function appears in the display
with its corresponding recommended
values.
 Set the values for the cooking
programme and confirm with OK.
Eco Fan Heat
appears and
Burst of steam
.
Start
Cancel process?
.
). The
Start
is
Start
message