Changing Values And Settings For A Cooking Programme - Miele DGC 7840 HC Pro Operating And Installation Instructions

Operation
Cleaning the steam combination oven
after cooking
 Remove the water container and
condensate container and empty
them as required.
 Switch the steam combination oven
off.
appears after a cooking
Appliance rinsing
programme involving steam.
 Follow the instructions in the display.
The rinsing process should be carried
out every time to flush any remaining
food deposits out of the system.
 After each use, clean and dry the
whole steam combination oven as
described in "Cleaning and care".
 Leave the appliance door open until
the oven interior is completely dry.
Refilling the water
If water needs replenishing during the
cooking programme, a tone will sound
and the display will prompt you to refill
the container with fresh water.
 Remove the water container and fill it
with fresh tap water.
 Push the water container into the
appliance.
 Close the control panel.
The cooking programme will continue.
62
Changing values and settings
for a cooking programme
Depending on the function, as soon as a
cooking programme is in progress, you
can change the values or settings for
this programme.
Depending on the function, you can
change the following settings:
-
Temperature
-
Moisture
-
Duration
-
Booster
-
Pre-heat
-
Crisp function