Step 13: Reset The E-Sbc - NEC SV8100 Configuration Note
Ip-pbx
Hide thumbs
Also See for SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
Configuration Note
4.13
Step 13: Reset the E-SBC
After you have completed the configuration of the E-SBC described in this chapter, save
("burn") the configuration to the E-SBC's flash memory with a reset for the settings to take
effect.
To save the configuration to flash memory:
1.
Open the Maintenance Actions page (Maintenance tab > Maintenance menu >
Maintenance Actions).
2.
Ensure that the 'Burn to FLASH' field is set to Yes (default).
3.
Click the Reset button.
Version 7.0
Figure 4-39: Resetting the E-SBC
63
4. Configuring AudioCodes E-SBC
AudioCodes Mediant E-SBC
Advertisement
Table of Contents
