14.
To route incoming calls using the DDI Translation tables, configure the SIP trunks as
DID types in Programming command 22-02:
15.
Using the '01 – Dial-in Receive Digits' field, configure the number of received DID/DDI
digits from the SIP carrier. In most cases this can be configured as six digits. If more
than six digits are received from the carrier, the last six digits are used for call routing.
AudioCodes Mediant E-SBC
Figure 3-10: Incoming Trunk Routing Type
Figure 3-11: DDI Receive Configuration
18
NEC SV8100 IP-PBX & BroadCloud SIP Trunk
Document #: LTRT-12530