Step 2: Enable The Sbc Application - NEC SV8100 Configuration Note
Ip-pbx
Hide thumbs
Also See for SV8100:
- Features and specifications manual (2210 pages) ,
- Features & specifications manual (1174 pages) ,
- Programming manual (986 pages)
Table of Contents
Advertisement
4.2
Step 2: Enable the SBC Application
This step describes how to enable the SBC application.
To enable the SBC application:
1.
Open the Applications Enabling page (Configuration tab > VoIP menu >
Applications Enabling > Applications Enabling).
2.
From the 'SBC Application' drop-down list, select Enable.
3.
Click Submit.
4.
Reset the E-SBC with a burn to flash for this setting to take effect (see Section
page 63).
AudioCodes Mediant E-SBC
Figure 4-4: Enabling SBC Application
26
NEC SV8100 IP-PBX & BroadCloud SIP Trunk
Document #: LTRT-12530
4.13
on
Advertisement
Table of Contents
