NEC SV8100 Configuration Note page 57

Configuration Note
4. Configure another manipulation rule (Manipulation Set 4) for BroadCloud SIP Trunk.
This rule is applied to response messages sent to the BroadCloud SIP Trunk IP Group
for Rejected Calls initiated by the IP-PBX. This replaces the method type '502' with the
value '480', because BroadCloud SIP Trunk not recognizes '502' method type.
Index
Name
Manipulation Set ID
Message Type
Condition
Action Subject
Action Type
Action Value
Figure 4-33: Configuring SIP Message Manipulation Rule 2 (for BroadCloud SIP Trunk)
Version 7.0
Parameter
57
4. Configuring AudioCodes E-SBC
Value
2
Reject Responses
4
any.response
header.request-uri.methodtype=='502'
header.request-uri.methodtype
Modify
'480'
AudioCodes Mediant E-SBC