Table Of Contents; Introduction - Husqvarna DXR 95 Operator's Manual

Introduction..................................................................... 2
Safety............................................................................24
Operation...................................................................... 39
Maintenance................................................................. 85
Troubleshooting.......................................................... 127
Owner responsibility
WARNING:
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability
to breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders
wear appropriate respiratory protection such
as dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
To minimize dust emissions, use water
to bind the dust, when feasible. If dry
operation is necessary, use an appropriate
dust extractor.
It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
product safely. Supervisors and operators must have
read and understood the Operator's Manual. They must
be aware of:
• The product's safety instructions.
• The product's range of applications and limitations.
• How the product is to be used and maintained.
2
Contents

Introduction

Processing of concrete and
Transportation, storage and disposal......................... 139
Technical data............................................................ 143
Warranty..................................................................... 157
Supplier's declaration of Conformity........................... 158
Open source............................................................... 159
National/Local regulations could restrict the use of this
product. Find out what regulations are applicable where
you work before you start using the product.
Product description
The product is a demolition robot. The product is
operated with a remote control.
Go to www.husqvarnacp.com or log on to the Costumer
Portal for more information about the product and spare
parts.
Arm system
The 3 parts of the arm system give good movement
properties and a long range. Operate the arm system
near the work object. This lets you use the force from
the arm system and the cylinders to a maximum.
Operation of cylinder 1 (A) and 2 (B) in parallel can
expand the range of the product when the product is
stationary.
A
B
1401 - 005 - 11.01.2024