Rear backplane cable routing
Figure 403. Rear backplane cable routing
From
Backplane 4: SAS 0, SAS 1
1
Backplane 4: PWR
2
Front + middle backplanes: 24 x 2.5" SAS/SATA + 4 x 2.5"/8 x 2.5" SAS/SATA
This topic provides cable routing information for the server model with three 8 x 2.5-inch SAS/SATA front
backplanes and one or two 4 x 2.5-inch SAS/SATA middle backplanes.
•
"24 x 2.5" SAS/SATA + 4 x 2.5" SAS/SATA" on page 385
•
"24 x 2.5" SAS/SATA + 8 x 2.5" SAS/SATA" on page 387
24 x 2.5" SAS/SATA + 4 x 2.5" SAS/SATA
This topic provides cable routing information for the server model with three 8 x 2.5-inch SAS/SATA front
backplanes and one 4 x 2.5-inch SAS/SATA middle backplane.
•
"32i RAID/HBA adapter" on page 387
•
"16i RAID/HBA adapters" on page 388
32i RAID/HBA adapter
The following shows the cable connections for the front 24 x 2.5-inch SAS/SATA + middle 4 x 2.5-inch SAS/
SATA configuration with one 32i RAID/HBA adapter.
To
CFF expander: C3
1
Riser 2: PWR1, PWR2
2
Chapter 6
.
Internal cable routing
385