Figure 298. Cable routing when two processors installed
From
Backplane 1: SAS
1
CFF adapter: MB (CFF
2
INPUT)
CFF adapter: PWR
3
One 8 x AnyBay backplane
This section provides cable routing information for the server model with one 8 x 2.5-inch AnyBay front
backplane.
To connect power cables for the front backplane(s), refer to
drive bays" on page
312.
To connect signal cables for the front backplane(s), refer to the following cable routing scenarios depending
on your server configuration.
•
"8i/16i RAID/HBA adapter" on page 317
•
"CFF 8i/16i RAID/HBA adapter" on page 318
8 x AnyBay
This topic provides cable routing information for the 8 x 2.5-inch AnyBay configuration.
•
"8i/16i RAID/HBA adapter" on page 317
ThinkSystem SR665 V3 User Guide
316
To
CFF adapter
1
• C0
• C1
Onboard: PCIe 5
2
Onboard: CFF RAID/
3
HBA PWR
Figure 299. Cable routing when one processor installed
From
Backplane 1: SAS
1
CFF adapter: MB (CFF
2
INPUT)
CFF adapter: PWR
3
"Backplanes: server models with 2.5-inch front
To
CFF adapter
1
• C0
• C1
Onboard: PCIe 2
2
Onboard: CFF RAID/
3
HBA PWR