Figure 90. Installing the GPU adapter
a.
Open the blue latch on the riser cage.
b.
Align the GPU adapter with the PCIe slot on the riser card. Then, carefully press the GPU
adapter straight into the slot until it is securely seated.
c.
Close the blue latch.
Step 4.
Connect the GPU power cable to the GPU adapter. See
281.
Step 5.
(Optional) Install an add-on air baffle 1 on the GPU air baffle.
Note: If a single-wide FHFL GPU adapter is to be installed on slot 1, 4, or 7, and the adjacent slot
is left empty or installed with a half-length adapter, install an add-on air baffle 1 on the GPU air
baffle first.
Figure 91. Installing an add-on air baffle 1
ThinkSystem SR665 V3 User Guide
130
Chapter 6 "Internal cable routing" on page