Sony DTC-670 Operating Instructions Manual page 3

Precautions
e Before operating the unit, be sure that the operating
voltage of your unit is identical with that of your local
power supply.
e The unit is not disconnected from the AC power source
(mains) as long as it is connected to the wall outlet,
even if the unit itself has been turned off.
@ Should any solid object or liquid fall into the cabinet,
unplug the unit and have it checked by qualified
personnel before operating it any further.
e@ Unplug the unit from the wall outlet if it is not to be used
for an extended period of time. To disconnect the cord,
pull it out by grasping the plug. Never pull the cord
itself,
Before making program source connections, be sure to
unplug the unit.
e Do not install the unit in a location near heat sources
such as radiators or air ducts, or in a place subject to
direct sunlight, excessive dust, mechanical vibration or
shock.
e@ Donot place anything on the top of the cabinet. The top
ventilation holes must be unobstructed for the proper
operation of the unit and to prolong the life of its
components.
If the unit is brought directly from a cold to a warm location,
moisture may condense inside the unit. In this condition,
the tape may adhere to the head drum and be damaged, or
the unit may not operate correctly. Always remove the
cassette when the unit will not be used.
If moisture is present...
e Function controls will not operate.
e@ All operations will stop.
When the CAUTION indicator lights and the unit will not
operate
Leave the unit turned on for about an hour.
If you have any question or problem concerning your unit,
please consult your nearest Sony dealer.